SiamtownUS SIAMTOWN US | CLASSIFIED ADS. | YELLOWPAGES | WEBBOARD | CONTACT    siamtownus facebook siamtownus classifield facebook siamtownus twitter

Contact Advertising : 1.800.494.1798
หน้าแรกเว็บบอร์ด  |  สมัครสมาชิก  |  หัวข้อล่าสุด  |  รายชื่อสมาชิก  |  ค้นหา


SiamtownUS Forum >> ข้อตกลงและเงื่อนไขในการใช้ เว็บบอร์ด >> กฎ กติกา มารยาท ข้อตกลงและเงื่อนไขในการใช้ เว็บบอร์ด >> Injection Moulding OEM
Injection Moulding OEM
ผู้โพสต์ หัวข้อ
ortjnfd0


Beginner

Join Date: 12/11/2017
Posts: 10

Posted: 12/11/2017 7:06:59 PM

Stack molds are very common in custom plastic injection molding. It’s always refers to a mold that is stacked with a series of mold parting faces or mold split lines. Without increasing the machine platen size or tonnage, you can double the amount of cavities to enlarge the output, which increases molding efficiency and reduces the overall cost. Stack molds with same cavities in each mold parting surface can produce double of same standard plastic parts, while stack molds with different cavities in each mold parting surface can also produce multi-component or family parts in one shot on one plastic injection molding machine.
Advantages:
1)Doubled output: instead of increasing the mold size by adding more cavities, stack molds maintain mold size and machine size by adding a second layer of cavities parallel to the first layer. All the fill, pack and cooling time remain the same and only the mold open and mold close time add slightly to the cycle time.
2)Reduced part and production cost: The part price is determined by the machines hour rate, which is directly related to the machine clamp tonnage. A stack mold requires only about half the clamp tonnage than a single-face mold with same number of cavities.
3)Efficiency and Improved Automation: Stack molds can produce multi-component assemblies in one shot on one plastic injection machine using the same parameters.
Should you''re interested in our plastic injection stack molds, welcome to buy our products and experience our OEM and customized service. With over 10 years experience, we known as one of the leading manufacturers and suppliers. Please rest assured to buy.Injection Moulding OEM
website:http://www.olimyplasticmolding.com/plastic-injection-molding/


  Copyright @ SiamtownUS.com 2011 DMG Forums 3.2