SiamtownUS SIAMTOWN US | CLASSIFIED ADS. | YELLOWPAGES | WEBBOARD | CONTACT    siamtownus facebook siamtownus classifield facebook siamtownus twitter

Contact Advertising : 1.800.494.1798
หน้าแรกเว็บบอร์ด  |  สมัครสมาชิก  |  หัวข้อล่าสุด  |  รายชื่อสมาชิก  |  ค้นหา

 
Username:
Password:
yueke >> yueke's Blogs >> Pallet Racking @ http://www.t-racking.com/pallet-racking/

Posted by yueke at 5/20/2015 6:49:32 PM         

    1. Upright Frame consists of 2 single post, horizontal bracing & diagonal bracing and bolts & nuts to connect them. The structure could give system a stable support. There are 2 or 3 lines of holes on post , the pitch is usually 75mm or 50mm, which make the beam height can be adjustable by 75mm or 50mm freely. Post section have 11-13 face, which increase the loading capacity. Upright Frame is made by rolling and forming machine.

    2. Beam consists of one bar and two beam connectors, beam is made by 2 pieces of profile welding together, which double the thickness of top & bottom side. This maximum the loading capacity under low cost. Safety pins lock into beam to prevent beam from falling down.

    Pallet Racking @ http://www.t-racking.com/pallet-racking/



  Copyright @ SiamtownUS.com 2011 DMG Forums 3.2